Observer Matrix : Matrix CLI : Matrix CLI : system network ipv4 dhcp
   
system network ipv4 dhcp
The system network ipv4 dhcp command enables the IPv4 network interface to use a DHCP server.
After issuing this command, you must use system network restart to activate your changes.
 
Usage
system network ipv4 dhcp <enable|disable>
 
 
Parameters
 
Parameter
Description
enable
Enables or disables using Dynamic Host Configuration Protocol (DHCP) for address assignments.
disable
Disables DHCP for IPv4. If you are using IPv4, you must configure the network settings with system network ipv4 commands.
 
Examples
matrix_host# system network ipv4 dhcp enable
matrix_host# system network ipv4 dhcp disable