Observer Matrix : Matrix CLI : Matrix CLI : system log snmp host
   
system log snmp host
The system log snmp host command sets the SNMP trap server using a host name or IP address.
The SNMP trap server is required when configuring remote logging and SNMP settings.
This command is one of four used to configure sending SNMP traps of log information. The other three are: system log snmp enable , system log snmp severity , and system log snmp community .
You must use system log restart to save your changes. Use show log settings to check settings before making any changes.
 
Usage
system log snmp host <HostName|IPAddress>
 
 
Parameters
Parameter
Description
HostName
The host name address of the SNMP trap recipient.
IPAddress
The IPv4 or IPv6 address of the SNMP trap recipient.
 
 
Examples
matrix_host# system log snmp host 10.0.64.33