Observer Matrix : Matrix CLI : Matrix CLI : system log snmp community
   
system log snmp community
The system log snmp community command sets the community string used with your SNMP trap server.
Only SNMP v1 is supported.
This command is one of four used to configure sending SNMP traps of log information. The other three are: system log snmp enable , system log snmp host , and system log snmp severity .
You must use system log restart to save your changes. Use show log settings to check settings before making any changes.
 
Usage
system log snmp community <CommunityString>
 
 
Parameters
Parameter
Description
CommunityString
Community string for your SNMP trap server. The default is 'public', but must be explicitly set.
 
 
Examples
matrix_host# system log snmp community private