Observer Matrix : Matrix CLI : Matrix CLI : system log remote port
   
system log remote port
The system log remote port command sets port used by the SysLog server.
The SysLog port is required.
This command is one of four used to configure sending events as SysLog messages. The other three are: system log remote severity , system log remote enable , and system log remote host .
You must use system log restart to save your changes. Use show log settings to check settings before making any changes.
 
Usage
system log remote port <Port>
 
 
Parameters
Parameter
Description
Port
The SysLog server port number. The default SysLog server port is 514, but must be explicitly provided.
 
 
Examples
matrix_host# system log remote port 514