Observer Matrix : Matrix CLI : Matrix CLI : system log remote host
   
system log remote host
The system log remote host command sets the SysLog server using a host name or IP address.
The SysLog host is required.
This command is one of four used to configure sending events as SysLog messages. The other three are: system log remote severity , system log remote enable , and system log remote port .
You must use system log restart to save your changes. Use show log settings to check settings before making any changes.
 
Usage
system log remote host <HostName|IPAddress>
 
 
Parameters
Parameter
Description
HostName
The host name address of the SysLog server.
IPAddress
The IPv4 or IPv6 address of the SysLog server.
 
 
Examples
matrix_host# system log remote host 10.0.64.30