Observer Matrix : Matrix CLI : Matrix CLI : modify port auto-negotiate
   
modify port auto-negotiate
The modify port auto-negotiate command enables or disables auto-negotiation on one or more ports.
Ports are set to auto-negotiate by default. Use show layout to view which ports have auto-negotiate enabled or disabled.
 
Usage
modify port auto-negotiate <PortList> <enable|disable>
 
 
Parameters
Parameter
Description
PortList
A comma-separated list of physical ports or a range of ports. For example, 1,4,6-8. No spaces are allowed.
enable
Enables auto-negotiation on the specified ports.
If selected, enables link speed auto-negotiation between this network port or tool port and its connected devices.
disable
Disables auto-negotiation on the specified ports.
 
 
Examples
matrix_host(layout_name)# modify port auto-negotiate 1 enable
matrix_host(layout_name)# modify port auto-negotiate 7,8,9,10 disable
matrix_host(layout_name)# modify port auto-negotiate 7-10 enable
matrix_host(layout_name)# modify port auto-negotiate 1,2,4-6 disable