Observer Matrix : Matrix CLI : Matrix CLI : modify rule trailer-uplink
   
modify rule trailer-uplink
The command modify rule trailer-uplink sets if trailers are appended to packets arriving at a network (ingress) port that is marked as an uplink port.
You can only enable the trailer uplink if modify rule trailer is already enabled otherwise you will get an error.
 
Usage
modify rule trailer-uplink <enable|disable>
 
 
Parameters
Parameter
Description
enable
If selected, an identifying trailer is appended to ingress packets as they arrive. Each trailer contains a timestamp and the Group ID, Box ID, and Port ID identifying where the packet arrived.
disable
Trailers are not appended to packets coming in an ingress port that is marked an uplink port.
 
 
Examples
matrix_host(layout_name)# modify rule trailer-uplink enableEnables appending trailers to packets arriving from a marked uplink port.
matrix_host(layout_name)# modify rule trailer-uplink disable Disables appending trailers to packets arriving from a marked uplink port.