Observer Matrix : Matrix : Matrix documentation changes
  
Matrix documentation changes
Along with the date, this list shows the major changes that were made to the product documentation.
 
March 30, 2018 (17.4.0.0)
Published 17.4.0.0 release notes for the Observer Platform.
 
 
February 8, 2018 (17.3.3.0)
Published 17.3.3.0 release notes for the Observer Platform.
 
 
November 27, 2017 (17.3.2.0)
Published 17.3.2.0 release notes for the Observer Platform.
 
 
September 15, 2017 (17.3.1.0)
Published 17.3.1.0 release notes for the Observer Platform.
Improved the search algorithm to provide better results by giving greater importance to terms found in titles, introduction paragraphs, and keywords.
 
 
July 13, 2017 (17.3.0.0)
Published 17.3.0.0 release notes for the Observer Platform.
 
 
May 5, 2017 (17.2.3.0)
Published 17.2.3.0 release notes for the Observer Platform.
 
 
March 10, 2017 (17.2.2.0)
Published 17.2.2.0 release notes for the Observer Platform.
 
 
January 17, 2017 (17.2.1.1)
Published 17.2.1.1 release notes for the Observer Platform.
 
 
January 11, 2017 (17.2.1.0)
Published 17.2.1.0 release notes for the Observer Platform.
 
 
December 2, 2016 (17.2.0.0)
Published 17.2.0.0 release notes for the Observer Platform.
 
 
November 22, 2016 (17.1.1.4)
Published 17.1.1.4 release notes for the Observer Platform.
 
 
September 23, 2016 (17.1.1.3)
Published 17.1.1.3 release notes for the Observer Platform.
 
 
September 20, 2016 (17.1.1.2)
Published 17.1.1.2 release notes for the Observer Platform.
 
 
September 20, 2016 (17.1.1.2)
No documentation changes.
 
 
August 25, 2016
Added Understanding log categories that can be used by Syslog, SNMP traps, and by viewing the Log tab that list the messages in these types: info, warn, error, and fatal.
 
 
July 29, 2016 (17.1.1.1)
Published 17.1.1.1 release notes for the Observer Platform.
 
 
July 16, 2016
Updated details about the twinaxial cable supported. Twinax cable must be 2 meters or shorter. Tested with Molex cables. Matrix technical specifications
 
 
September 16, 2015
Added a list of items that are backed up when backing up a Matrix.
 
 
September 15, 2015
Added a front panel photograph of the Matrix. This can help you locate the power button when factory resetting a disconnected Matrix.
 
 
September 4, 2015
Added instructions for handling sensitive data before and after repairs.
Added instructions for transferring your settings to a different Matrix.
Added instructions for decommissioning a Matrix.
 
 
August 12, 2015
Added troubleshooting information for load-balancing after a link loss caused by a power failure or other reason.
 
 
August 11, 2015
Added troubleshooting information if you get an “invalid credentials” error message.
Added details about logging, including information about Syslog and SNMP trap settings.
 
 
May 6, 2015
Updated the technical specifications to highlight Matrix support of 10 Gb Twin-Ax (CX4) cabling.
Matrix technical specifications