Hardware : Observer Platform appliance installation (G3-GS models) : How to set the IP address (G3-GS models and Observer GigaFlow Appliance)
  
How to set the IP address (G3-GS models and Observer GigaFlow Appliance)
Set the IP address of the hardware appliance while you still have physical access to it, such as immediately after it is racked and cabled. Setting the IP address ensures the hardware appliance has a visible and permanent network presence.
A running Observer Platform hardware appliance or Observer GigaFlow Appliance.
A KVM switch or keyboard, monitor, and mouse are connected. The user input devices or KVM switch are only temporarily needed to set the IP address, so you can disconnect them after the IP address is set.
The IP, subnet, and gateway or router addresses are available and known to you.
1. Log in to the Windows operating system using the Administrator account and its default password admin.
You can change the Administrator account password after logging in. See the Windows documentation if necessary.
2. In Windows, choose Start > Control Panel > Network and Sharing Center > Change adapter settings.
The Network Connections window appears.
3. Right-click ETH0 and choose Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4), and click Properties.
5. Set the IP address, subnet mask, router or gateway, and DNS server for your environment and click OK.
Figure 80: Default TCP/IP settings
6. Click OK again to close the Properties dialog for that network connection.
 
 
 
Starting now, all of your interaction with the hardware appliance can now be done remotely by connecting to the appliance using other Observer Platform products or Windows Remote Desktop depending on what you want to accomplish.